Unger ErgoTec SwivelLoc Handle

Product Information: SwivelLoc Handle

Unger ErgoTec SwivelLoc Handle fits Unger S Channels and Unger S Plus Channels. Additionally. provides secure attachment to Unger OptLoc and TelePlus poles

Features: SwivelLoc Handle

• Swivel with locking feature
• Straight version often used for using with a telescopic pole
• Angled version often used by hand
• Secure fitting on poles with a ErgoTec cone

Straight Unger Code LS000
Angled Unger Code LA000

Customer Questions: SwivelLoc Handle

What does a Unger SwivelLoc Handle do? It is the part of the Squeegee that you hold in your hand or fits onto a Telescopic Pole. Additionally, it also holds the Channel and Rubber.

Helpful Tips:

As part of the ErgoTec range it has been designed to fit Telescopic Poles with the ErgoTec end cone for positive attachment. It can also be used on most other poles with cones that require a simple push fit. This Handle holds the Rubber by means of two teeth - so no End Clips are required. This also means changing a rubber is very quick and easy.

Do all Handles fit all Channels and Rubbers? No. The simple way to make sure that the Handle will fit the Channel and Rubber made by Unger.

Firstly, choose the right range. Unger Stainless Steel Channels in the 'S Channel' and 'S Channel Plus' ranges will fit this Handle.

Will any length of Channel and Rubber fit? This Handle will fit Channel and Rubbers from 6" 15cm to 22" 55cm within the 'S Channel' and 'S Channel Plus' ranges.

Using The Handle:

How do I fit the Channel and Rubber? Firstly, the Handle has a spring clip on the underside, and when pressed will lift the teeth that hold the Channel and Rubber. If you're doing this for the first time, it can seem a little difficult. However when you have done it a few times you will find a way that suits you. So, with the spring clip pressed in, slide the Channel and Rubber passed the teeth until it reaches the middle. (Important: The teeth on the clip face the castling in the Channel). Next, the Channel has small arrows that point to the middle position. Lastly, now adjust the Rubber position to make it even on both ends of the Channel by pressing the spring clip enough that the Rubber can slide.