Unger Rinse & Go Pure Water Cleaning Kit

UNGER Pure-Water Cleaning Kit

Unger Rinse & Go Pure Water Cleaning Kit: wash windows, glass facades, solar panels, conservatories with 100% pure water (without chemicals) for super clean and streak-free results. The Unger Pure Water Cleaning System has a quick-connection and thus fits any standard garden hose, which you connect at the bottom. The hose to the brush is connected to the top of the filter unit. Turn on the water tap and you can start to work. Also the water is 100% purified of all minerals at tap pressure by a replaceable 2L bag of resin contained within the unit.

Two lengths of pole are available:

• AK158 contains a 2-section Aluminium pole that extends to 1.5m
• AK159 contains a 3-section Aluminium pole that extends to 4.5m

Features:

• Compact Pure Water Filter including one bag of filter resin (2 litres)
• Aluminium telescopic pole including 20m of hose with 27cm wide brush fitted with pencil jets
• TDS meter to measure pure water quality.
• Convenient garden hoselock connectors
• Easy to change resin bag

How much pure water?

The amount of water you can purify depends on the amount of minerals in the tap water and this varies by region. Soft water has a TDS reading of 100 ppm or less, while some regions with very
hard water have a TDS reading of 400 ppm or greater.

Also the mineral content in tap water is measured with the TDS meter on the front of the Unger Pure Water Cleaning System. Place the TDS meter in a glass with water from the Unger Pure Water
Cleaning System. The TDS reading will indicate 000 TDS at the start. As soon as the value starts to increase, the resin is saturated and the DI filter resin bag should be replaced. Up to a value of
approximately 010 TDS you can still expect clean glass, solar panels, conservatories etc.