Unger ErgoTec Handle Combo

Product Information: Unger ErgoTec Handle Combo

Unger ErgoTec Handle Combo a brilliant combination of two great products.

The Unger S PLUS CHANNEL is made from a good quality Stainless Steel. With a precision engineered ‘Dog Eared' design for accurate detailing. Also, these channels come complete with Unger premium Pro Rubber. These Channels do not require End Clips, as the rubber is held in place by teeth on the Unger Handle.

Unger product codes:

• UC350 35cm 14" Unger S Plus Channel
• ETG00 Unger ErgoTec Handle

Using The Squeegee Combo:

How do I fit the Channel and Rubber? The Handle has a spring clip on the underside, and when pressed will lift the teeth that hold the Channel and Rubber. If you're doing this for the first time, it can seem a little difficult. However, when you have done it a few times you will find a way that suits you. So, with the spring clip pressed in, slide the Channel and Rubber passed the teeth until it reaches the middle. (Important: The teeth on the clip face the castling in the Channel). The Channel has small arrows that point to the middle position. Now adjust the Rubber position to make it even on both ends of the Channel by pressing the spring clip enough that the Rubber can slide.

As part of the ErgoTec range it has been designed to fit Telescopic Poles with the ErgoTec end cone for positive attachment. It can also be used on most other poles with cones that require a simple push fit.

Are there any special safety precautions I need to take while using the pole? Yes, when using this or any other Aluminium or Steel pole care needs to be taken to avoid overhead power lines and cables. Metal is an excellent electrical conductor and contact with an electrical source could result in serious injury or death from electrocution. Also do not this or other poles in an electrical storm, as being struck by lightning can likewise cause series injury or death.