Unger GC Brass Channel

Product Information: Unger Brass Channel

Unger GC Brass Channel are well made and come complete with Unger premium soft rubber and end clips.

Unger product codes:

• GC350 14" 35cm
• GC450 18" 45cm

Customer Questions:

Do I need End Clips? Yes you do if you use Brass channels as they hold the rubber within the channel of a squeegee.

What will happen if I don't use them? Possibly two things, Firstly as the clips tension the rubber not fitting them limits performance. Secondly the rubber might simply slide out of the channel.

Helpful Tips:

How do I fit them? Remove your old rubber by pulling the end of the rubber. As you do so the first old clip should become visible. Remove the clip and discard it. Now pull your old Rubber through the Channel from the other side and discard. Your new Rubber should be 6mm longer than the Channel. Insert the new rubber through the Channel. Now you can fit a new End Clip on the Rubber at one end. Leave about 3mm between the end of the Rubber and the collar of the End Clip. Push the End Clip into the Channel. Pull the Rubber at the other end so that it extends enough to fit the second End Clip, again leaving 3mm between the collar of the End Clip and the end of the Rubber. Press the second End Clip into the Channel.

If the rubber is not tensioned correctly: You can gently pull the rubber from one end and adjust the distance between the end of the Rubber and the collar of the End Clip.