SYR Sovereign Brass Channel

Product Information: SYR Brass Channel

The SYR Sovereign Brass Channel are available in a variety of sizes from 6" 15cm up to 18" 45cm. If you need a squeegee handle, Ettore manufacture one. Channels come complete with the high quality SYR rubber and end clips.

Customer Questions: SYR Channel

Do I need SYR End Clips when replacing the rubber? Yes you do if you use Brass channels as they hold the rubber within the channel of a squeegee. When new, the channels are supplied with end clips and rubber.

What will happen if I don't use them? Possibly two things, Firstly as the clips tension the rubber not fitting them limits performance. Secondly the rubber might simply slide out of the channel.

How many do I need? On a 6" 15cm Channel you need just 1. For all other sizes you will need 2.

Helpful Tips: SYR Channel

How do I fit them? Remove your old rubber by pulling the end of the rubber. As you do so the first old clip should become visible. Remove the clip and discard it. Now pull your old Rubber through the Channel from the other side and discard. Your new Rubber should be 6mm longer than the Channel. Insert the new rubber through the Channel. Now you can fit a new End Clip on the Rubber at one end. Leave about 3mm between the end of the Rubber and the collar of the End Clip. Push the End Clip into the Channel. Pull the Rubber at the other end so that it extends enough to fit the second End Clip, again leaving 3mm between the collar of the End Clip and the end of the Rubber. Press the second End Clip into the Channel.

If the rubber tension is incorrect: You can gently pull the rubber from one end and increase the distance between the end of the Rubber and the collar of the End Clip.