Streamline 8mm Push Fit Reducing to 6mm Push Fit Quad Adapter

Product Information: Streamline 8mm Push Fit Reducing to 6mm Push Fit Quad Adapter

The Streamline 8mm Quad CONNECTOR is a nylon John Guest (JG) type of Quad Connector. Designed to be used with Streamline brushes that have for nozzles. It is a replacement part for the two nozzle kits below

• Fan Jet Pack of 4 Streamline Code FJ2-04
• Pencil Jet Pack of 4 Streamline Code NJ3-04

JG type of fittings such as this quad connector are self-sealing. These streamline Connectors are also durable and long lasting. To seal a tube into the hose in the fitting, simply press the tube into the fitting and then gently pull it backwards. This will create a seal and the tube will be fixed into the fitting. Releasing the tube is also easy. Just press in the collar and gently pull out the tube.

It is designed to connect 8mm outside diameter (OD) hose or tube. Most Pole hose has a 5mm bore, but the outside diameter of pole hoses vary. By using a Streamline Connector Stem, any 5mm bore hose can be used with this Quad Nozzle CONNECTOR. Also, please note: the four ports for the jets are for 6mm OD hose and may require using a stem connector WXW041, if converting from a twin 2-jet nozzle pack. Contact us for more details.

Product code: PF0806QUAD

Features Quad Nozzle CONNECTOR

• Lightweight and small construction
• Easy to use
• Quick to change
• No serviceable parts

Customer Questions Streamline Quad Connector:

Which part do I need when my brush has only 2 nozzles? You might find the Streamline 8mm Tee connector is the part you need.

Helpful Information Quad Nozzle CONNECTOR

JG type of fittings work well with extruded thermoplastic tube that has a smooth outer surface. However, the connector works less well with braided hose. We suggest therefore that a stem insert is used rather than relying on the hose to seal.

Protect from severe frost.

Although it is possible to remove the tube from the fitting, we do not recommend this is repeatedly done. Also, we recommend that the connector is used either within the pole or at the top of the pole near the pole brush. The fitting is not as robust as Rectus 21 or hoselock fittings that are often used in connecting hose before or outside the pole.